USLIM Foldable Exercise Bike Stationary Bikes for Home, 5 IN 1 Indoor Workout Bike, Cycling Bike with 16-Level Quiet Magnetic Resistance, 6.6 LBS Flywheel and 300LBS Capacity for Senior and Home Workout

Hard to believe ….
It is hard to believe that this exercise bike cost only $120! Very well packaged and thoughtfully pre-assembled with all of the nuts and bolts pre-inserted for easy assembly. No hunting around in a bag of parts. The bike frame is very substantial heavy steel tubing.I’ve only used it for 2 days since receiving it but have been very surprised that it is perfectly quiet – not a sound out of it – and very smooth riding. At its highest setting, the magnetic resistance is more than adequately challenging for maintenance workouts. The on-board computer has more than adequate features – another surprise at this price level.So, first impression is that this is well-built, comfortable, perfectly stable in use, and a terrific value.Now we shall have to see how it ages!

Great indoor bike
The bike is perfect, so quiet, keeps track of calories, distance, time, and miles. I definitely recommend putting a mat under it, same as everyone else has mentioned. It easily folds up to smaller size that you can pack away in the closet. It took about an hour for me to put together by myself. All the screws are in the spots, you just unscrew then attach and screw together. Everything was packaged pretty good but on part was crushed, but that piece was not really needed. Overall I would say yes great purchase.

Quality, easy to assemble bike for a low price.
A sturdy, well built bike that was easy to assemble. Quality for your money. It arrived in time as well.

HAZARD
I’m not even halfway done assembling this and the conical washers are installed wrong on the video. They’re faced wings up, not faced down (flush with the tube) additionally, it’s definitely NOT SAFE, HUGE RISK for injuries. also the pin is NOT staying IN, it keeps working its way free! WHAT?!? The pin that goes in it’s supposed to adjust the bike seat, height, and angle! This is a very serious safety hazard. A seat detaching from an exercise bike during use could lead to:* Falls: The rider could be thrown off balance and fall, potentially causing injuries like bruises, cuts, sprains, or even fractures.* Impact Injuries: The rider could hit the bike frame or other objects in the vicinity, leading to more severe injuries.* Exacerbation of Existing Conditions: For individuals with pre-existing health conditions, such as back problems or joint issues, a sudden fall could worsen their condition.The Manufacturer’s Disregard for Safety:The fact that the spring-loaded pin is so easily disengaged demonstrates a significant disregard for safety on the part of the manufacturer. This mechanism is crucial for ensuring the seat remains securely attached, and its failure could have serious consequences.Additional Concerns:* Repetitive Motion: Repetitive motion during exercise can further increase the risk of the pin disengaging. The constant stress and vibration can weaken the mechanism over time.* User Weight: The weight of the rider also plays a role. A heavier rider will put more stress on the pin, making it even more likely to fail.* Unpredictability: The pin could disengage at any moment, without warning, making it impossible for the rider to anticipate or react in time to prevent a fall.Recommendations:* Do Not Use the Bike: It is extremely unsafe to use the bike in its current condition.* Contact the Manufacturer: Immediately contact the manufacturer to report the issue and demand a resolution. This could involve a replacement part, a full refund, or a recall of the product.* Consider Reporting to Consumer Safety Authorities: You may also want to report the issue to consumer safety authorities in your country. This can help to prevent others from being injured by the same faulty product.This is not a minor issue. It’s a serious safety hazard that the manufacturer needs to address. Please do not use the bike until the problem is resolved.Furthermore, because the washers were demonstrated in the product video as curvature faced up. That’s how I screwed them down on the handlebar forks.. realizing after research that that’s incorrect and unsafe, I had to unscrew all the screws. Screw them down. Make sure they were tight and flush (as best I could, because as you may notice the washers in the front aren’t curved to the same angle and degree as the forks so they still stick out on the side which a washer ideally is not supposed to do) anyways tightening the bolts on the side and it stripped. Now it just spins freely with the hex bolt wrench. Meaning there are only three points of contact that someone using this bike would have to maintain safety in the front so I need another screw at the very least to see if that would fix the problem. THAT aspect of the problem.Also, if you’re over 200 pounds. And your hips are wide. The back bars are not gonna fit around your hips. (nothing over 50 inch of circumference will fit on that bike seat with the bars installed correctly and properly .You won’t be able to fit inside the seat. I got this for someone in my family who has edema and I wanted circulation without pressure but now I’m afraid because the back pin on the seat is breaking free, the sloppy installation video showing the washers installed incorrectly and subsequently having to unscrew and re-screw screws that go to the handlebars in the front forks with one now stripped? I just hope it’s the screw that stripped and not the actual frame, if the metal frame parts of this bike are so lightweight that you can strip the hole before you can strip the screw/bolt? Then that’s a hazard right there. I don’t dare try and unscrew it and then put another screw in there until I receive one from the manufacturer… I don’t know IF I’m gonna have to reach out to this company or send this thing back because, I’m not going to let my elderly relative get on this thing now so that they can gain health and then end up with a serious injury, possibly life-threatening because of the above mentioned issues.Here’s a breakdown of what we’re seeing and why it’s a problem:What We See:* Conical Washer: As we discussed, it’s a conical washer, designed to sit flush against a curved surface.* “Wings Up” Orientation: The washer is installed with the wider edge (the “wings”) pointing upwards, away from the curved tube.* Not Flush: The washer is clearly not making full contact with the tube.* Bolt and Nut: The bolt and nut are holding the washer in this incorrect position.Why This Is Wrong:* Compromised Stability: The primary purpose of a washer is to distribute the load and prevent loosening. With the washer incorrectly oriented, the load is concentrated on a small point of contact, making the connection weak and prone to loosening.* Potential for Damage: The uneven pressure can damage the tube over time, potentially leading to cracks or deformation.* Safety Hazard: In an exercise bike, a loose connection can be extremely dangerous. It can cause the bike to become unstable, potentially leading to falls or injuries.* Poor Quality Control: This, combined with other issues like the faulty spring-loaded pin and sloppy welding, strongly suggests poor quality control in the manufacturing process.This is likely a case of poor manufacturing practices and a lack of attention to detail.* Safety: These concerns about safety are absolutely valid. A faulty exercise bike can pose a serious risk.Recommendations:* Do Not Use the Bike: I WILL NOT USE THIS BIKE you’ve THEY’VE corrected the issue, I cannot chance it.* Address Other Issues: I am trying to contact the manufacturer for replacement parts or a refund.Once I’ve done that, I will update this review.* At the moment I am consideringReturning this Bike if possible: If I’m not confident in your ability their ability fix the issues, or if you’re concerned about the overall quality of the bike, then I will consider returning it.My picture clearly shows that the washer is installed incorrectly. This is a screenshot from the assembly video provided by the manufacturer on this company’s . You are correct in your assessment that it should be flush with the curve of the tube.The PIN Does not have a tight ball bearing it pulls free with minimal effort!This is a very serious safety hazard. A seat detaching from an exercise bike during use could lead to:* Falls: The rider could be thrown off balance and fall, potentially causing injuries like bruises, cuts, sprains, or even fractures.* Impact Injuries: The rider could hit the bike frame or other objects in the vicinity, leading to more severe injuries.* Exacerbation of Existing Conditions: For individuals with pre-existing health conditions, such as back problems or joint issues, a sudden fall could worsen their condition.The Manufacturer’s Disregard for Safety:The fact that the spring-loaded pin is so easily disengaged demonstrates a significant disregard for safety on the part of the manufacturer. This mechanism is crucial for ensuring the seat remains securely attached, and its failure could have serious consequences.Additional Concerns:* Repetitive Motion: As you mentioned, repetitive motion during exercise can further increase the risk of the pin disengaging. The constant stress and vibration can weaken the mechanism over time.* User Weight: The weight of the rider also plays a role. A heavier rider will put more stress on the pin, making it even more likely to fail.* Unpredictability: The pin could disengage at any moment, without warning, making it impossible for the rider to anticipate or react in time to prevent a fall.Recommendations:* Do Not Use the Bike: It is extremely unsafe to use the bike in its current condition.* Contact the Manufacturer: Immediately contact the manufacturer to report the issue and demand a resolution. This could involve a replacement part, a full refund, or a recall of the product.* Consider Reporting to Consumer Safety Authorities: You may also want to report the issue to consumer safety authorities in your country. This can help to prevent others from being injured by the same faulty product.This is not a minor issue. It’s a serious safety hazard that the manufacturer needs to address. Please I do not recommend using this bike. If you have similar issues check all of your connections. Everything that’s bolted down everything that’s supposed to screw in everything that’s supposed to stay where it is double check what the manufacturer gave you because, otherwise it’s dangerous . I will not use this bike until I anm confident and comfortable that the problems are resolved completely 100% my health is just too important as the health of my family members.This won’t let me make an addendum to the review. There is a problem from top to bottom with this machine now, I just simply tried to fold it up so that I could move it and get it the hell out of here before I can return it or whatever I need to do because I am not sitting on this thing for sure And the bottom plastic wheel popped off and I noticed that the tube on the bottom of the machine that’s supposed to be the backrest brace is not only sharp where the plastic thing comes off, but it’s not in the not in the shape of an O NOT in the shape of a circle. It’s severely dented like it’s in the shape of a D and they just crammed the plastic on the side anyway!

Very straight forward assembly, very good material, very sturdy getting on and off,we feel it is an excellent bike for the price. The assembly bolts were with each of the differentparts. We feel it is worth considering if you are look for this type of equipment. It is also verycomfortable.

Good quality easy assemble worth money you are pay